1

Mechanical   Drawing and AutoCAD

1. Orthographic projection, stereo projection, view,   sectional view and profile of parts;

2. Expression of standard parts and commonly used   mechanical parts, drawing of parts and reading of part drawings;

3. The application of AutoCAD software in mechanical   drawing and product drawing management.

4. Drawing and reading of assembly drawing, and   expression of cooperation relationship of parts;

5. Drawing of mechanical assembly drawings with AutoCAD   software.

2

Basics of Mechanic Design

1. Basic concepts,   marking and look-up table of dimensional tolerance, shape and position   tolerance and surface roughness of parts;

2. Degree of freedom and   basic work analysis of commonly used planar mechanisms;

3. Design, calculation   and selection of belt drive, gear drive, worm drive, rolling bearing,   coupling and clutch.

3

Electrotechnics

1. Basic concepts and   laws of circuits;

2. Analysis of DC   resistance circuit;

3. Sinusoidal AC circuit   analysis;

4. Control of   asynchronous AC motor;

5. Selection of   low-voltage electrical appliances.

4

Comprehensive   Training of Machining

1. basic operation   training of lathe;

2. basic operation   training of milling;

3. Basic operation   training of plane grinding;

4. Basic operation   training of benchwork.

5

Electrical   Machinery and Electric and Pneumatic Control

1. The structure, principle, selection,   installation and debugging of AC/DC motor, stepping motor and servo motor,   and mastering the common methods of speed regulation and control and the   installation and debugging process;

2. the basic links of Commonly-used low-voltage   electrical appliances and electrical appliance control, and finishing the   analysis of the electrical circuit of the electrical control system of   typical machine tools, and making and debugging of the control panel;

3. Selection of Servo driver, frequency   converter, hardware wiring, operation parameter setting and system debugging.

6

Pneumatic Control Technology

1.   Basics of pneumatic transmission;

2.   Working principle of commonly-used pneumatic components, devices and   transmission systems, component selection, and analysis of commonly-used   pneumatic circuit ;

3.   Basic methods of design, installation and debugging of typical pneumatic   systems.

7

Sensor   and Machine Vision.

1. Structure and basic working principle of   sensor and machine vision system;

2. Selection and installation of sensors and   machine vision systems;

3. Installation, programming, testing and   debugging of sensors and machine vision systems.

8

PLC   application technology.

1.PLC structure and working principle;

2. PLC Instruction system

3.PLC stepping program design;

4. Use of PLC function module;

5. Use of PLC special function modules;

6.PLC communication technology.

9

Man-machine Interface and Network Control   Technology.

1. Basic working principles of touch screen   technology, configuration technology and industrial control network;

2. Selection of configuration and network   control components, system installation and connection, programming,   operation and debugging of control programs;

3. Typical methods of troubleshooting and   equipment maintenance.

10

AutoCAD Electrical (ACE)

1. basic use of ACE software;

2. Electrical and pneumatic schematic design;

3. Design of electrical and pneumatic layout;

4.BOM table creation.

11

Programming   and Application of Industrial Robots

1. Composition, classification, application   and development of industrial robots;

2. Main technical parameters of industrial   robots;

3. Basic operation knowledge of industrial   robots;

4. industrial robot I/O communication;

5. Industrial robot program data;

6. Programming of industrial robots.

12

Integration   and Debugging of Intelligent Production Line.

1.   able to design and build a simple mechatronics system;

2.   able to design and adjust the electrical control circuit of mechatronics   system;

3.   able to design and adjust the pneumatic (or hydraulic) circuit of   mechatronics system;

4.   Understand a 3D drawing software (such as Inventor, etc.);

5.   able to design the mechanical part of the mechatronics system;

6. able   to operate and troubleshoot the electromechanical system skillfully.